top of page

Why Use Water From the Tap to Clean Your Windows?

This is because the water that comes from the tap has several benefits for cleaning windows as compared to using glass cleaners. That water from the tap, which is unrestricted, does a good wash job and leaves the windows sparkling clean. Usually, tap water is fine for washing windows with a few simple enhancements.


Tap water is a vital necessity in our daily lives and has many benefits if utilized correctly in our households.


It is also handy, and no charges are incurred.


The availability of tap water means that you do not need to cart water from a distant source to the window to clean it. While window cleaners may require purchase and subsequent storage until they are to be used, tap water comes directly out of the tap. This makes it very convenient to clean windows at any given one's convenience since no scheduled time is set. Besides, tap water is relatively cheaper than purchased cleaners since it comes with no financial charge. When it is time to get that clean, shiny surface, rinsing a surface with water from the tap helps cut unnecessary costs.


Cleans stains and grease.


It is testified that tap water is perfect in dissolving and washing off dirt, dust, grime, or any other debris on window surfaces. The water chokes and dislodges particles, and vigorous scrubbing and pressure rinse complete the washing process. Any cleaning tool that has the chance to rub and possibly scrape the debris can remove stains and make windows clean again with tap water.



Doesn't Leave Residue


Tap water is free from soap residues and streaking agents, unlike some everyday household products used for cleaning glass. This means that windows are left with only water droplets that are deposited on the windows once they have been cleaned and are left to dry without any hazes or streaks. Despite the fact that Windows might require some additional time in order to dry, the final effect will be noticeably superior in terms of the level of clearness. They also do not leave a residue behind. As such, the windows remain cleaner for a more extended period than with soapy cleaners.


Functions and Substances to Boost the Efficacy of Tap Water for Cleaning


However, using plain tap water on your windows can be pretty effective; a couple of extra additives will take your cleaning experience to the next level. These supplementary boosters address other relatively dirty windows and also increase the dissolving and cutting of the water.


- Dish Soap


Diluting a little bit of dish soap with water in a spray bottle heightens the liquid's capability to cut grease. Using a small amount, usually a drop or two, will start the cleaning process of the water with the grime-fighting feature without any soapy scum. Dish soap handles the grease, grime, sticky stuff, and any other kitchen scum that gravitates to windows near the sink area. It is simple to remove it all with water, and it leaves your car with a film and streakless shine.


- White Vinegar


As observed earlier, dilution of tap water with white vinegar improves the latter's mineral-deposit solubilizing potential considerably. The vinegar helps the water loosen calcium, lime, challenging water content, and other alkalis from the window surfaces. Diluting an equal proportion of vinegar and water in a spray bottle helps to effectively wash off grime, calcium deposits, and other marks that cause water spots to bring out the shine. Different cleaning agents cannot reach these crevices and mineral deposits; this cleaner brings out a crystal clear, as good as new, sparkle.


- Corn Starch


As for the windows with a relatively thick film or greasy layer that cannot be Navage, corn starch is highly effective. Purchase corn starch and dilute it with a couple tablespoons of the powder in a spray bottle filled with tap water; this cleaning solution is gentle and mildly abrasive enough to address dirt build up on the windows. The windows are cleaned by spraying the solution and rubbing it around with a cloth or sponge; the starch in the solution gives enough friction to remove hard-to-clean remnants without the need to scratch the glass. Corn starch in water solution gives that extra scrubbing power as if it's a separate product.


Application Tips and Tricks


The key factors that would enable people to take advantage of the superb window cleaning offer presented by Tap Water are as follows. It is established that tap water, if applied with the proper techniques, will produce better results compared to ordinary glass cleaners.



- Work uses Top to Bottom


It is always recommended to wash windows from the upper panel and work our way down to the lower part. In this way, gravity takes the dirty solution and drips it off the glass rather than it making secondary streaks. The top of a top-to-bottom work stays cleaner for longer durations.


- A viable option is the application of Newspaper or Microfiber


Use paper materials like newspapers or microfiber towels when wiping surfaces since rags leave fuzz or particles behind. Micro fibers mainly assist in wiping the windows clean as if they have been newly cleaned with no further addition of unwanted matter.


- Rinse Properly


After the windows seem to look clean, especially the parts where no dirt and debris are apparent, rinse with clean water, then use a dry cloth to wipe off any traces of water. Such soap or vinegar residue requires washing to prevent the re-deposit of minerals that may be left when the water droplets dry.


Conclusion


Water from the tap provides convenience and makes a perfect washing liquid to clean windows. This cleaner removes dirt effectively without leaving a stain or fog on the glass, costs less than the commercial spray for glasses, and incorporates other auxiliary elements available in the house. Use the following pointers to achieve that perfect window shine from most professional window washing services. It can also be a good idea to use tap water next time you want to clean windows with a freshly refreshing touch!

3 views0 comments

Comments


bottom of page